Shibaricon's CRAM navagationshibariconCRAMcontact CRAMCRAM termsCRAM linksCRAM tutsCRAM FAQCRAM info

Japanese Boola-boola Wench
by MorTis

A Japanese wench....no not the female type, a boola-boola wench, is a way to help tighten up rope when tying of to a frame, or doing suspension easier!. When using this system, you only lift 30% of the weight, so it allot easier to lift!

Step 1: Start off by creating a Boola-boola restaurant around a limb, or the body.

Step 2: Take the tails and loop them around a frame, or beam.

Step 3: Bring the tails back down, and through the bight of the boola-boola,

Step 4: pull the tails up, which will pull the boola-boola up, like your using a chain wench.

Step 5: When you get the boola-boola (and body and/ body part) to the desired height, tie a hitch and a half around all the ropes. Fin.

Option 1: In Step 3 instead of pulling the tails through the bight, you can pull the tails through the band of the boola-boola (i.e between the boola-boola and the body or wrist/ankle) and the go to step 4. This technically will support more weight, and you still have the option to quickly untie the wench faster from the boola-boola square knot!

 

 


Back to Tuts Page

By using any of the info on these pages, you are agreeing that you are an adult 18 years of age, and anything you learn and use from these pages you are using at your own risk!

.Web Counter
Nawashi have been here!.

Last updated: 6/24/03 Webmaster MorTis 2003
CRAM is a Division of Shibaricon™ Inc © 2003