Shibaricon's CRAM navagationshibariconCRAMcontact CRAMCRAM termsCRAM linksCRAM tutsCRAM FAQCRAM info

Knotted Karada / Kikkou
(body Harness)

by MorTis

Needed: 1 Victim with a body, 40-100 ft of rope depending on the body size, and how many diamonds are created.

A body harness take a little practice to get use to doing, and there are many styles of them also. I am going to show a Knotted version of the body harness.

Step 1: Find the center of your rope, and create a bight.

Step 2: Tie a overhand knot about 2 inches in from the bight.

Step 3: Then go down about 10-12" and tie about 5 overhand knots every 4-6 inches after that. ( The space between the first and second overhand knot is going to be where the head goes. You want 1 knot for ever diamond you want to create in the front ... you want them to end up above the chest, below the chest, 1 or 2 on the stomach, and one on the waist)

Step 4: Place the bight between the shoulder blades on the back, splitting the ropes apart between the between the 1st and 2nd knots and place the rope over the head and down on the shoulders,

Step 5: Pull the rope down between the breasts, draping the series of 5-6 knots down the front of the body down to the floor.

Step 6 Pull through the crotch, up between the butt cheeks, up the back to the bight between the shoulders.

Step 7: Pull the tails through the bight at the tail bone to create a larks head. Leave the rope loose, because later on it will get allot tighter.

Step 8: Spilt the 2 tails apart and pull them each around each said of the body to the front (one going around the right armpit, the other going around the left armpit) to the rope lays in the front.

Step 9: Pull the tails through the rope between the 2nd and 3rd knots (the first diamond above the chest)

Step 10: Pull each tail back the way it came from, back around to the rope lay in the back.

Step 11: Now you can either just wrap the rope around the whole body back to the front to the next diamond, or you can create a folded diamond.

To created a folded diamond .... while holding a tail in each hand (if standing in back: the left tail in the left hand, the right tail in the right hand) grab the opposite rope from the back fall. Twist the back fall of rope over each other to make a diamond shape. The pull the tails from front to back through the diamond. Keep the rope a little loose.

Step 12: Bring the tails around the sides of the body to the front fall. Pull the tails through the 3rd and 4th knot.

Step 13: Repeat steps 11-12 as many times as needed, usually about 4-5 diamonds work best, but experiment to see what you like.

Step 10: Finish by creating a square knot in the back by the tail bone to finish off the harness.

Option: To make a bar handle if you have 3ft extra rope, wrap the rope around a diamond. Then pick a diamond higher on the harness, and then wrap the tails around it. Then twist the rope back down around till you run out of rope creating a handle. And tie a square knot to finish it off.

HINT: You can make a love knot by making a overhand, square knot or a braids in the rope around the clit so the knots will rub harder and deeper into/on the clit, giving more of a sensation.

 


Back to Tuts Page

By using any of the info on these pages, you are agreeing that you are an adult 18 years of age, and anything you learn and use from these pages you are using at your own risk!

.Web Counter
Nawashi have been here!.

Last updated: 6/24/03 Webmaster MorTis 2003
CRAM is a Division of Shibaricon™ Inc © 2003